High specific gravity tungsten alloy products are a special material made from a mixture of tungsten and other alloying elements with extremely high density and hardness. This material is commonly used in the manufacture of wear-resistant components and cutting tools because of its ability to maintain its hardness and strength under extreme temperatures and pressures.
Tungsten-nickel-iron alloy applications :
Used as shielding components
Electrical products with rivet heads and switching contacts
gyroscope rotors, vibration dampers in aerospace applications
Counterweights, rivet heads, balancing weights Radiation shielding devices
| Material | Density(g/cm3) | Tensile Strength(Mpa) | Elongation(%) | HRC |
| 85W-1.5Ni-4.5Fe | 15.8-16.0 | 700-1000 | 20-33 | 20-30 |
| 90W-7Ni-3Fe | 16.9-17.1 | 24-32 | ||
| 90W-6Ni-4Fe | 16.7-17.0 | 24-32 | ||
| 91W-6Ni-3Fe | 17.1-17.3 | 25-28 | 25-30 | |
| 92W-5Ni-3Fe | 17.3-17.5 | 18-28 | ||
| 92.5W-5Ni-2.5Fe | 17.4-17.6 | 25-30 | ||
| 93W-4Ni-3Fe | 17.5-17.6 | 15-25 | 26-30 | |
| 93W-4.9Ni-2.1Fe | ||||
| 93W-4.9Ni-2.1Fe | ||||
| 93W-5Ni-2Fe | 17.9-18.1 | 700-900 | 8-15 | 25-35 |
| 95W-3.5Ni-1.5Fe | ||||
| 96W-3Ni-1Fe | 18.2-18.3 | 600-800 | 6-10 | 30-35 |
| 97W-2Ni-1Fe | 18.4-18.5 | 8-14 | ||
| 98W-1Ni-1Fe | 18.4-18.6 | 500-800 | 5-10 | |
| 90W-6Ni-4Cu | 17.0-17.2 | 600-800 | 4-8 | 25-35 |
| 93W-5Ni-2Cu | 17.5-17.6 | 500-600 | 3-5 |
High specific gravity tungsten alloy products are a special material made from a mixture of tungsten and other alloying elements with extremely high density and hardness. This material is commonly used in the manufacture of wear-resistant components and cutting tools because of its ability to maintain its hardness and strength under extreme temperatures and pressures.
Tungsten-nickel-iron alloy applications :
Used as shielding components
Electrical products with rivet heads and switching contacts
gyroscope rotors, vibration dampers in aerospace applications
Counterweights, rivet heads, balancing weights Radiation shielding devices
| Material | Density(g/cm3) | Tensile Strength(Mpa) | Elongation(%) | HRC |
| 85W-1.5Ni-4.5Fe | 15.8-16.0 | 700-1000 | 20-33 | 20-30 |
| 90W-7Ni-3Fe | 16.9-17.1 | 24-32 | ||
| 90W-6Ni-4Fe | 16.7-17.0 | 24-32 | ||
| 91W-6Ni-3Fe | 17.1-17.3 | 25-28 | 25-30 | |
| 92W-5Ni-3Fe | 17.3-17.5 | 18-28 | ||
| 92.5W-5Ni-2.5Fe | 17.4-17.6 | 25-30 | ||
| 93W-4Ni-3Fe | 17.5-17.6 | 15-25 | 26-30 | |
| 93W-4.9Ni-2.1Fe | ||||
| 93W-4.9Ni-2.1Fe | ||||
| 93W-5Ni-2Fe | 17.9-18.1 | 700-900 | 8-15 | 25-35 |
| 95W-3.5Ni-1.5Fe | ||||
| 96W-3Ni-1Fe | 18.2-18.3 | 600-800 | 6-10 | 30-35 |
| 97W-2Ni-1Fe | 18.4-18.5 | 8-14 | ||
| 98W-1Ni-1Fe | 18.4-18.6 | 500-800 | 5-10 | |
| 90W-6Ni-4Cu | 17.0-17.2 | 600-800 | 4-8 | 25-35 |
| 93W-5Ni-2Cu | 17.5-17.6 | 500-600 | 3-5 |
