Views: 189 Author: Site Editor Publish Time: 2022-08-12 Origin: Site
VSI Rotor Tips are widely used in river pebble, limestone, quartzite, basalt, granite, roads, railways, high-rise buildings, hydropower dam construction, concrete batching plants, sand and gravel yards, cement, refractory materials and other industries, especially quarrying The field and gravel plant are the indispensable artificial sand and gravel equipment and the indispensable sand making machine for large-scale engineering construction.
Why choose VSI Rotor Tips?
What is the future of VSI Rotor Tips?
What are the common faults and solutions for VSI Rotor Tips?
1. VSI Rotor Tips has a deep crushing cavity, which can make full use of the impact action to crush the material, and the machine-made sand produced has a good shape.
2. The upper and lower lining plates, guide plates, counterattack plates and other parts of VSI Rotor Tips also use new wear-resistant materials, such as ceramic coatings and tungsten composite materials, while changing the shape. , its service life can reach more than 700 hours.
3. VSI Rotor Tips, generally used in the third and fourth stage crushing and sand making process, the feed particle size can reach 150-180mm, it can be directly used in the secondary crushing process, and can partially replace the traditional cone crusher or impact crusher.
4. Under the requirements of environmental protection, manufacturers have to set up dust control devices in the production process to minimize the dust pollution generated by VSI Rotor Tips in the production process.
VSI Rotor Tips Prospect Interpretation
As long as the basic engineering construction is carried out, the artificial sand produced by VSI Rotor Tips must be its main raw material. The market is very broad and the demand is huge. Therefore, the investment in VSI sand making machine is a long-term stable project, in addition, the finished sand and gravel processed with VSI Rotor Tips have better particle shape and reasonable gradation.
In high-rise buildings and other engineering fields where natural sand cannot be used, machine-made sand plays an irreplaceable role. Therefore, the application prospect of VSI Rotor Tips in the production of basic building aggregates is relatively bright.
1. The idling resistance is too large. Reason: stuffing in the upper sealing cover of the bearing Solution: open the upper sealing cover to remove
2. The swing of the body is too large. Reason: the wearing parts on the impeller are seriously worn, and the feeding particle size is too large. Solution: replace the wearing parts and reduce the feeding particle size.
3. The bearing is heated Cause: lack of oil or dust, bearing damage Solution: refuel or clean the bearing, replace the bearing
4. Metal collision sound Cause: Lining or impeller wearing parts fall off Solution: Re-tighten
5. The particle size of the product is too large Reason: the V-belt is too loose Solution: Tighten the V-belt.
Zhuzhou Jinxin Group Cemented Carbide Co., Ltd. has focused on the production and development of VSI Rotor Tips for more than several years, and they have always put the needs of customers as their top priority.