How to install snow tire studs？

When driving on snow and ice, installing Snow Tire Studs can significantly improve the grip of your tires and enhance the stability and safety of your vehicle.

1. Before installation, prepare the tire studs, installation tools (such as manual or electric installer) and lubricants, and clean the tire surface to remove mud and impurities.

2.The length of the tire studs should be chosen according to the thickness of the tread, and it is generally recommended that the studs protrude from the tread by 1-2mm to ensure grip without damaging the tire.JX110 Grip Studs Screw Studs are suitable for automobiles, pickup trucks, street and dual sport motorcycles, and wading boots, and choosing the studs that meet your needs ensures that the studs are used with the maximum effectiveness.

3.Tires usually have pre-drilled nail holes, follow the diagrams provided by the tire manufacturer to evenly distribute the nails in each tread groove to avoid centralized installation affecting the balance.

4. Using a special installation tool, slowly screw the nails into the nail holes to ensure that the studs are firm but not excessively deep to prevent damage to the tire structure. For tires without pre-drilled holes, use a hand drill to lightly drill holes for installation. Jinxin offers both manual and electric installer to provide you with a variety of options while helping to make the process of installing your skid steer nails safer.

After installation, check that all nails are secure and gently rotate the tire to observe any looseness. When driving for the first time, it is recommended to drive at a low speed for 50-100 kilometers to allow the nails to fully break in with the tread to ensure firmness.