What are the characteristics of Carbide Studs?

Carbide Studs has a wide variety of full-threaded studs, double-ended studs, single-ended studs, shoulder studs, and non-standard studs.

What are the structural characteristics of Carbide Studs?

What are the characteristics of Carbide Studs?

What to do with Carbide Studs coming out?

What are the structural characteristics of Carbide Studs?

Carbide Studs is a kind of fastener mainly used in sheet metal, thin plate, chassis and cabinet. The shape of the pressure riveting stud is hexagonal at one end and cylindrical at the other end. There is a relief groove between the hexagonal edge and the cylindrical shape. Its inner shape is an internal thread, and the hexagonal head is pressed into the preset hole of the thin plate by a press (the diameter of the preset hole is generally slightly smaller than the cylindrical outer diameter of the pressure riveting stud), so that the periphery of the hole is plastically deformed, and the deformed part is deformed. Squeeze into the undercut groove of the pressure riveting nut column, so that the pressure riveting stud is riveted on the thin plate, so as to form an effectively fixed internal thread on the thin plate.

What are the characteristics of Carbide Studs?

Carbide Studs have good rigidity, but when the force is asymmetric, the middle is thick and the deformation is small. This deformation force will aggravate the force on the small diameter of the thread. The force is concentrated at the thread, and the free length of the thread should be increased during thread rolling. Improve the deformation capacity of bolts;

The size of the unthreaded part of the thin stud stud is approximately equal to the middle diameter (type B), the thread and the polished rod part can distribute the load evenly (both at the middle diameter position), and the flexibility is good. Rod studs and thin rod studs have another feature. Stress is easy to concentrate at the connection and it is easy to find problems; the threaded part and the middle part of the full-threaded bolt are the same. This overall consistency makes the bolt stress Uniform, will not increase the force of the thread, suitable for harsh environments with frequent changes in high temperature and high pressure stress.

What to do with Carbide Studs coming out?

The Carbide Studs come out by themselves, but the nut does not move, which means that your two nuts are coaxial with the same mouth, the two nuts are not given radial pressure, and the threads of the two nuts exit at the same angle. Under the vibration, the bolts self-retract. When screwing again, use the spring washer, count the number of turns, and place the two nut outlets 180 degrees apart, which will generate lateral torsion, which can offset part of the vibration.

This is the introduction related to the Carbide Studs. Do you also have a deeper understanding? Zhuzhou Jinxin Group Cemented Carbide Co., Ltd. has committed to providing the most suitable Carbide Studs at a reasonable price.