Publish Time: 2022-06-08 Origin: Site
The design of VSI Rotor Tips integrates the principles of advanced "stone-to-stone" and "stone-to-iron" technologies. This high-efficiency sand-making equipment is developed by professional designers to ensure its competitiveness for 3-5 years. It incorporates advanced technology, high production efficiency, mature processes, excellent wear resistance, and high-quality materials, ensuring a long service life.
1. The crushing ratio of VSI Rotor Tips can reach more than 50, which is larger than that of traditional sand making equipment;
2. When VSI Rotor Tips crushes materials, it will break along the fragile layer of the material. The crushed materials are mostly cubes with low needle flake content. Compared with ordinary sand making equipment, the needle flake percentage is about 5% lower. ;
3. VSI Rotor Tips have a selective crushing effect, which is suitable for both soft and hard materials. After crushing, the material with a large specific gravity has a small particle size, and the material with a small specific gravity has a large particle size after being crushed;
4. The crushing cavity of VSI Rotor Tips is deep, which can make full use of the impact action to crush materials, and the produced machine-made sand has uniform particle size and good particle shape.
The output particle size of VSI Rotor Tips is related to the physical properties of the ore and the input particle size. The ore is fragile, and the smaller the input particle size, the higher the qualified rate of the product particle size. Conversely, the lower it is, the smaller the impeller speed is, the product particle size can also be adjusted. When the particle size of the output product of the sand making machine is not greater than 10mm, the qualified rate is 60-90%. In order to ensure that the qualified rate of the product particle size reaches 100%, it is necessary to use grading equipment for closed-circuit crushing.