Publish Time: 2022-06-28 Origin: Site
The crusher is mainly to crush the large sand and gravel raw materials (such as limestone, granite, river pebbles) into small sand and gravel aggregates, which can be crushed into 0-5mm, 5-10mm, 10-20mm and other different particle sizes. Crusher is widely used in many industries such as mining, smelting, building materials, highway, railway, water conservancy and chemical industry. It is an essential tool for the construction industry.
How to use the crusher correctly?
How to stop the crusher?
Which crushers are popular with consumers?
1. Preparation before the operation of the crusher. Before starting the crusher, first check whether the connection between the main parts of the crusher and the fastening bolts is loose and the integrity of the safety device. Block ore, make sure to prepare before operation.
2. Start the crusher and normal operation steps. When starting the crusher, it must be driven in the order of the operating procedures, and pay attention to when starting the main motor, the ammeter on the control cabinet should indicate that the current value is reduced to the normal working current value, and then adjust and control the miner to ensure the uniformity of feeding and the granularity of the material. Do not exceed the width of the inlet, and the bearing temperature should not be too high. If the electrical equipment trips automatically and the reason is unknown, it is strictly forbidden to force it to start continuously. It should be emphasized that in the event of mechanical failure and personal accident, the vehicle must be stopped immediately.
Stop the crusher. When stopping the crusher, pay attention to the order of stopping and driving, and operate in the direction of the production process. In addition, only after the crusher is stopped, the lubrication and cooling system can be stopped, and the work of cleaning up the hygiene of various parts and checking the machine can be done. In case of a sudden power failure, the power supply should be cut off immediately and the ore in the crushing chamber should be removed.
High-efficiency fine crusher
The high-efficiency fine crushing sand making machine has a wide range of uses, and its performance has reached a relatively good level. It is an effective, practical and reliable crushed stone sand making machine. It is especially suitable for making abrasives, refractory materials, cement, quartz sand, steel sand, etc. Fine crushing and medium crushing of various hard and brittle materials is an energy-saving and environmentally friendly crushed stone sand making equipment, which saves 50% energy than traditional fine crushers.
mobile crusher
This equipment looks like a car. The body can be equipped with feeding, screening, conveying, crushing and other equipment. It not only occupies a small area, but also can move freely without piling or remote control of its production. It is easy for beginners to use.
Zhuzhou Jinxin Group Cemented Carbide Co., Ltd. is known for high precision crusher. If you want to order the crusher, you can connect them.