Spectacle wear plate cutting ring description
Spectacle wear plate cutting ring currently commonly used production materials are high chromium alloy cast iron, high manganese steel, alloy tool steel, cemented carbide, alloy ceramics and so on. Among them, the hard alloy is used as the wear-resistant material and its hardness and wear-resistant compared with the cladding layer has a substantial increase, but the alloy as a super-hard material and its brittleness is also larger.
Therefore, the alloy used as the spectacle plate should be a very different alloy from the traditional alloy formula, the requirements of this alloy not only has a high hardness and wear resistance, but also has excellent impact resistance, fully meet the use of soil pump requirements.
Spectacle wear plate cutting ring Specification
1,Material: plate body S35C steel, tungsten carbide E5 grade
2,Lifetime:30000~80000cbm
3,Type: hardfacing, normal tungsten carbide,7shape T.C
4,Germanywelding rod used for hardfacing
5,Tensile strength≥ 2500 N/mm2
6,HRA≥86
| Item | Spectacle wear plate Zoomlion Sany concrete pump parts wear spectacle plate wear plate and cutting ring |
| Brand | Putzmeister, Schwing, Sermac, Sani, Zoomlion, Cifa, Kyokuto, lHl, Junjin, Everdigm, etc. |
| Type | DN180,DN200,DN220,DN230(Wear-resistant castings), Hard-facing, Tungsten Carbide7 shape TungstenCarbide |
| Material | Tungsten carbide, Q235B steel, VAUTlD-150 electrode inported from Germany |
| Lifetime | 30,000-80,000cbm based on different types |
| Carbide Hardness | ≥HRC 86 |
| Tensile strength | >2500N/mm2 |