Views: 110 Author: Site Editor Publish Time: 2022-06-20 Origin: Site
Tungsten Carbide Studs are widely used in electricity, chemical, oil refining, valve, railway, bridge, steel structure, automobile and motorcycle accessories and other fields.
What is the meaning of Carbide Studs?
What are the advantages of Carbide Studs?
How do I install Carbide Studs?
Tungsten Carbide Studs generally need to undergo surface treatment. There are many kinds of screw surface treatments, such as electroplating, blackening, oxidizing, phosphating and electroless zinc flake coating. However, galvanic fasteners make up a large part of the actual use of fasteners. Especially in automobiles, tractors, household appliances, instrumentation, aerospace, communications and other industries and fields, they are more widely used. For threaded fasteners, however, not only a certain corrosion protection is required in use, but also the interchangeability of threads, which can also be referred to here as screwability, must be ensured. In order to meet the double use performance of "corrosion protection" and "interchangeability" required by thread fasteners used, it is necessary for carbide studs to develop special coating standards.
Tungsten Carbide Studs save time and money. All Carbide Studs are designed without drilling, punching, tapping, riveting, tapping and finishing steps, continuously expanding the application potential for structural design, high currents and low penetration. Therefore, welding on very thin sheets is possible. The workpiece for stud welding must be welded from one side. Solderable in all positions, delimited by means of extensions on vertical bulkheads. Since it is welded for a short time and there is little deformation after welding, no trimming is required. Since the welded structure does not require drilling, there is no leakage. The joint can achieve high strength, that is, the joint strength of bolt welding is greater than the strength of the bolt itself.
The advantage of carbide studs over other welding methods is the welding performance. Standard bolts are inexpensive for serial workpieces. There are different types of equipment and welding torches, and the purchase cost of equipment is relatively low. Depending on the product, it can be processed into a multi-station welding machine or a high-precision CNC welding machine in portal design. Tungsten Carbide Studs have high reproducibility and low scrap rates. However, when using stud welding, it is important to note that, as with fusion welding, there are certain limitations in terms of the carbon content in the steel. For structural steel bolts, welding should be carried out according to the recommended combination of bolt material and base material. There will be a non-fusibility with the base metal. Combinations of bolt material and base metal outside the recommended range must be tested to determine weldability and product design requirements of the anchor bolt for the possibility of appropriate testing and evaluation.
Zhuzhou Jinxin Group Cemented Carbide Co., Ltd. has been focusing on the production and development of Carbide Studs for several years, and has always placed the needs of customers as the top priority. Here you can select the Carbide Studs that meet your requirements.