You are here: Home » News » News » What is tapered button bits

What is tapered button bits

Views: 1     Author: Site Editor     Publish Time: 2021-12-20      Origin: Site

What is tapered button bits

  1. With carbide buttons hot pressed on bits bodies,Tapered Button Bits have a very good drilling performance and long life time.Different diameters and taper degrees are available to suit different applications in mining, quarrying etc.Zhuzhou Jinxin can supply long skirt and short skirt Tapered Button Bits.

2.Comparing with tapered chisel bits and tapered cross bits, button bits has higher technology, much longer primary drilling time and higher drilling efficiency,so that the button bit is popular among the users.

3.Tapered equipment affords drillers the ability to change drilling bits whilst still using the same drilling rod.Drillers choose tapered button bits for faster drilling penetration rate. Different taper sizes have different characteristics when it comes to the“knock-off”index – the smaller angle will prevent the bit from spinning. 

tapered button bit

4.• Suitable for small hole range.

   • Widely used in Dimensional Stone Quarrying Industry.

   • Widely used in Underground Mining Industry.

5.Button Bit Types

A.Taper button bit

33mm, 38mm, 44mm


QUICK LINKS

PRODUCT CATEGORY

CONTACT US

 Yuyu
 +86 133-9733-9096
 +86 133-9733-9096
+86 133-9733-9096
 13397339096@ojinxin.com

SEND US MESSAGE

CONTACT US
Copyright  2021 Zhuzhou Jinxin Group Cemented Carbide Co., Ltd.  Sitemap | Support By Leadong