You are here: Home » Products » Carbide Brazed Tips » Welding blade tungsten carbide welding tips outer round turning tool grain

Welding blade tungsten carbide welding tips outer round turning tool grain

Availability:

Welding blade tungsten carbide welding tips outer round turning tool grain

YT5A 612

A325


1, welding cutting carbide tiops structure should have enough rigidity

Sufficient rigidity is ensured by the maximum allowable external dimensions and by the use of high strength steel grades and heat treatments.

2, hard alloy blade should be fixed and reliable

The cemented carbide welding blade should have enough fixed firmness, which is guaranteed by the slot and welding quality, so the slot shape of the blade should be selected according to the shape of the blade and the geometrical parameters of the tool.

3, carefully check the knife rod.

Before welding the blade to the tool bar, necessary checks should be made on the blade and the tool bar, first of all, check that the supporting surface of the blade is not severely bent.The cemented carbide welding surface shall not have serious carburizing layer, and the dirt in the cemented carbide blade surface and tool bar insert groove shall be removed to ensure the welding is firm.

4, reasonable selection of solder

In order to ensure the welding strength, the appropriate solder should be selected.In the welding process, should ensure good wetting and fluidity, and eliminate bubbles, so that the welding and alloy welding surface full contact, no welding phenomenon.

5, the correct choice of welding flux

It is recommended to use industrial borax, which should be dehydrated in the drying oven before use, and then crushed, screened to remove mechanical debris, and then used.




Previous: 
Next: 

Product Category

Product Inquiry

QUICK LINKS

PRODUCT CATEGORY

CONTACT US

 Yuyu
 +86 133-9733-9096
 +86 133-9733-9096
+86 133-9733-9096
 13397339096@ojinxin.com

SEND US MESSAGE

CONTACT US
Copyright  2021 Zhuzhou Jinxin Group Cemented Carbide Co., Ltd.  Sitemap | Support By Leadong