You are here: Home » Products » Tungsten Carbide Parts » Carbide Rod » Tungsten Carbide Rods Round Blank And Finished Bar

Tungsten Carbide Rods Round Blank And Finished Bar

Zhuzhou Jinxin Tungsten carbide rod are mostly applied for drill bits, end mills, and reamers with sub-micron grain grade YL10.2, for non-ferrous precision cutting and wood cutting with grade YG6X, and for fiberglass reinforced plastics, titanium alloys, hardened steel with ultra-fine grain grade YG8X, etc.
Availability:
wechat sharing button
sharethis sharing button

Tungsten Carbide Rod And Bar

Zhuzhou Jinxin Tungsten carbide rod are mostly applied for drill bits, end mills, and reamers with sub-micron grain grade YL10.2, for non-ferrous precision cutting and wood cutting with grade YG6X, and for fiberglass reinforced plastics, titanium alloys, hardened steel with ultra-fine grain grade YG8X, etc.


  • Specificaiton: Diameter:1.5~40 mm x 330mm

  • Surface Condition: Sintered blank

  • Chemical Composition: WC :88.5% + Co: 10% + Others: 1.5%

  • Density: 14.2~14.6 g/cm3

  • Hardness: HRA91.5 min.

  • T.R.S.: 3200N/mm2 min.


carbide rod (3)

carbiderod2

Other size for tungsten carbide buttons

Properties of tungsten carbide buttontungsten carbide button

1. Cemented carbide/tungsten/spherical button

2. Wearing resistance good

3. Best suited to hard rock

4. Abrasive to very abrasive


圆棒组合 (6)

carbiderod3

carbiderod4


ZHUZHOU JINXIN

Previous: 
Next: 
Inquiry

QUICK LINKS

PRODUCT CATEGORY

CONTACT US

 Yuyu
 +86 133-9733-9096
 +86 133-9733-9096
+86 133-9733-9096
 13397339096@ojinxin.com

SEND US MESSAGE

CONTACT US
Copyright  2021 Zhuzhou Jinxin Group Cemented Carbide Co., Ltd.  Sitemap