Views: 112 Author: Site Editor Publish Time: 2022-06-10 Origin: Site
The use of Carbide Studs offers many advantages. Stud bolts are very suitable for joining relatively heavy components, and Carbide Studs have excellent wear resistance, so that even with frequent disassembly, Carbide Studs can still be used for a very long time. Sometimes we recommend everyone to use carbide studs.
How to use Carbide Studs?
What to pay attention to when welding Carbide Studs?
What does Carbide Studs mean?
During any maintenance, the newly replaced Carbide Studs and other newly replaced accessories should be checked. The focus of the test is on the head and guide parts of the Carbide Studs, with each part of the thread strictly inspected for cracks. Or dents, also check out carbide studs for changes in the shape of teeth. Is there an anomaly in the thread pitch? In case of abnormalities, it must no longer be used. When installing the connecting rod cover, a torque wrench should be used. The torque must be tightened according to the specified standards, and the torque should not be too large or too small. Also pay attention to the selection of carbide studs from the supporting manufacturer.
1. Choose a suitable solder, Carbide Studs should choose low melting point solder wire for welding electronic components.
2. Dissolve flux, 25% rosin in 75% alcohol (weight ratio) as flux.
3. The electric soldering iron should be tinned before use. The specific method is: Heat the electric soldering iron. When the solder can be melted straight, apply flux and then apply the solder evenly to the solder tip so that the solder tip is eaten evenly. A layer of tin.
4. Tungsten Carbide Studs welding process, components pads and pins clean with fine sandpaper and apply flux. Dip a reasonable amount of solder with the tip of a soldering iron and touch the solder joint. After the solder is completely melted at the solder joint and immersed in the component supply line, the tip of the soldering iron gently rises along the component supply line to leave the solder joint.
5. The welding time of carbide studs should not be too long, otherwise the components will burn easily. If necessary, clamp the pins with tweezers to help dissipate heat.
Tungsten Carbide Studs, as the name suggests, are a threaded column that can simply be understood as the product obtained after tapping a metal cylinder. A type of fastening element in which both ends of a bolt are provided with an external thread. When connecting, one end of it must be screwed into the part with the inner threaded hole, the other end must be passed through the part with the through hole, and then the nut must be screwed on so that the two parts are firmly connected as a whole. This form of joint is called Carbide Studs joint, which is also a detachable joint. It is mainly used where one of the connected parts is thick, requires a compact design or is not suitable for a screw connection due to frequent disassembly.
Great products start with the best engineers, and Zhuzhou Jinxin Group Cemented Carbide Co., Ltd. is ready to assist you with your Carbide Studs technical requirements.