How much do you know about Carbide Studs?

Carbide Studs are generally threaded at both ends (single-head studs are threaded at one end), usually one end of the thread is firmly screwed into the body of the component, and the other end is matched with the nut, which plays the role of connection and tightening, but in very small To a large extent also has the role of distance.

What are the Carbide Studs connection features?

Where is the Carbide Studs connection suitable?

How to fix Carbide Studs?

What are the Carbide Studs connection features?

1. One of the connected parts of Carbide Studs is thick, blind holes are made on it, and threads are cut on the blind holes.

2. Thin-piece through hole, no thread. Connect with studs and nuts.

3. Carbide Studs allow multiple assembly and disassembly without damaging the connected parts.

Where is the Carbide Studs connection suitable?

1. Carbide Studs are usually used when one of the connected parts is too thick to be perforated, and the structure is required to be compact. Blind holes must be used for connection or frequent assembly and disassembly.

2. Carbide Studs connection is to screw one end of the double-ended stud into the screw hole of one of the connected parts, and the other end through the through hole of the other connected part, then put on the washer and tighten the nut. This type of connection is often used when one of the connectors is too thick or inconvenient to assemble and disassemble. When disassembling, usually only the nut is removed and the stud is not removed, so as to prevent the screw hole of the connected part from being damaged by repeated assembly and disassembly. It is mainly used for occasions where one of the connected parts is thick, requires a compact structure, or is not suitable for bolt connection due to frequent disassembly.

How to fix Carbide Studs?

1. First screw the short end of the thread into the machine base (the seat with blind holes), pay attention to screw it all the way to the low beam rod;

2. Screw in two nuts at the longer end of the thread.

3. Take out the double nut, and then thread it into the cover.

4. Then put the washer on the screw, and finally tighten the screw.

If you feel that the Carbide Studs are not easy to tighten during operation, you can try the following method.

First screw two nuts on the head thread and tighten each other. After screwing the other end into the screw hole, clamp the two nuts above to add force to the screw, and screw the screw into the screw hole for tightening. The two boards are respectively clamped with the two nuts above, and the two are unscrewed from each other and then withdrawn respectively. Next is the single-head screw, which is tightened according to the conventional method.

The Carbide Studs have been used in many fields. Zhuzhou Jinxin Group Cemented Carbide Co., Ltd. maintains close relationships with customers in Carbide Studs industry, and is committed to strengthening production and operation, improving quality and safety.